Page 2 / Photo Gallery


	THE KEY IS A BIG MOTOR TO DO A LITTLE JOB, NOT OTHER WAY AROUND. THE DIFFERENCE IS IN THE DESIGN - "We didnt reinvent our trains motive power, We have a prototype MANUFACTURER, of mining locomotives scale it down to fit inside 1 inch scale and up."

	WITH MY MOTOR YOU CAN HAUL 40 - 50 CARS..... Even if you don't want to, having the ability to, and not using that power gives you more efficiency and much longer run times.
	Can you SAFELY operate YOUR locomotive from OVER 250 FEET BACK??? *With my system you CAN, and it still maintains ALL* of the safety systems on board, just use our custom extension cables, available in 6, 10, 20, 50 and 100 foot long sections. Completely Wireless systems are also available.**

CLICK on the photos below, to ZOOM IN or view the gallery.

In the pictures below you can see the contents of the complete conversion kit AND different locomotives running with my drive system.

(Photo 1) shows a choice of 2 colors (GREY or BLACK) for the hand held box.
NOTE-> (Photo 1) also shows an optional power meter installed in the GREY box.

(Photo 7) shows one of my Railroad Supply F-7A units. It has a NEW chassis with the basic kit installed onto it. In this photo it has 2, 12 volt AGM batteries with a low 76AH rating to supply the 24 volts DC power.
With this set up it would run for 4+ hours per charge, demonstrating its superior efficiency by running for so long on such small batteries.

** For optimum performance and run time(12+ hrs.) I strongly recommend using four, 6 volt Trojan T-105 batteries with a rating of 185 amp hours. Or the EQUIVELANT. Keep in mind your batteries are your "FUEL TANK" **

Page 1 of 1